2017-2020 Gen 2 Ford Raptor Billet Upper Control Arm Kit - Stock Length
Description
Description
These billet aluminum upper control arms are a direct bolt-on replacement for the 2017-2020 Gen 2 Ford Raptor, with adjustable 7/8" FK rod ends at the frame and a 1.25" FK uniball at the spindle. They work with the stock spindle, let your alignment shop adjust caster and camber, and use replaceable wear parts so you never replace a whole arm for a worn joint.
CNC machined in-house in Mesa, Arizona and 100% made in the USA.
Why Upgrade Your Gen 2 Raptor Upper Control Arms
- Adjustable caster and camber. The 7/8" FK rod ends at the frame give your alignment shop room to dial in the front end.
- Serviceable. When the 1.25" uniball or rod ends show wear, replace just those parts instead of the whole arm, the way you would with stock arms.
- Direct bolt-on. Designed to work with the stock Gen 2 spindle.
Components & Construction
- Billet aluminum upper control arms, CNC machined in Mesa, Arizona
- 7/8" FK rod ends at the frame, adjustable for caster and camber
- 1.25" FK uniball at the spindle
- Rod end and uniball spacers machined in-house from 17-4 stainless steel
- FMI billet bearing caps
Finish Options
Raw billet aluminum, or anodized FOX Orange, Black or Blue.
Fitment: Which Arm Fits Your Raptor
This kit fits the 2017, 2018, 2019 and 2020 Ford F-150 Raptor (Gen 2), stock length.
- 2010-2014 Gen 1 Raptor: Gen 1 billet upper arm kit
- 2021 and newer Gen 3 Raptor: Gen 3 billet upper arm kit
- Raptor R: Raptor R billet upper control arm kit
- Want more wheel travel? The Gen 2 mid travel kit with billet upper arm and the Gen 2 +3" long travel kit replace the stock-length arms.
What's Included
- (1) right and (1) left billet aluminum upper arm with 7/8" FK rod ends and 17-4 stainless spacers, and 1.25" FK uniball with 17-4 stainless spacers at the spindle
- (2) FMI billet bearing caps
- (1) right and (1) left wheel position sensor mount plate
- (1) sensor location drill template
- (1) hardware kit
FAQ
Will these upper control arms fit my 2017-2020 Raptor?
Yes. This stock-length kit is made for the 2017, 2018, 2019 and 2020 Gen 2 Ford Raptor and works with the stock spindle.
What ball joint do the Gen 2 arms use?
A 1.25" FK uniball at the spindle and 7/8" FK rod ends at the frame, with 17-4 stainless steel spacers.
Why is there a drill template in the kit?
The kit includes wheel position sensor mount plates and a sensor location drill template for mounting the sensor. See the install instructions for details.
Can I replace the uniball or rod ends later?
Yes. The uniball and rod ends are replaceable wear parts, so you service them instead of replacing the whole arm.
Do I need an alignment after installing upper control arms?
Yes. Have the front end aligned after installation. The adjustable rod ends let the shop set caster and camber.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
- All in-stock products typically ship within 48 hours.
- For items that are not currently in stock, please expect 4–6 weeks for production and delivery.
- For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com
PROP 65 WARNING
PROP 65 WARNING
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov






















