AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98

Raptor R Billet Upper Control Arm Kit - stock length

Description

A stock-length billet aluminum upper control arm kit for the Ford F-150 Raptor R, designed to bolt on with the factory spindle. Each arm is CNC machined from billet aluminum at our Mesa, Arizona facility and runs a 1.25" FK uniball at the spindle and 7/8" FK rod ends at the frame.

The upper control arm locates the top of the spindle, so its joints decide how precisely the front wheel holds its alignment when the suspension is loaded. This kit puts a uniball and rod ends at those pivots and makes caster and camber adjustable at the frame mounts, without changing arm length.

What Is In The Kit

  • 1 right side and 1 left side billet aluminum upper control arm
  • 7/8" FK rod ends at the frame mounts, with 17-4 stainless steel spacers
  • 1.25" FK uniball at the spindle, with 17-4 stainless steel spacers
  • 2 FMI billet bearing caps
  • 1 hardware kit

Why Billet Upper Arms

Every bump, landing and hard corner pushes on the upper control arm. Any movement in its joints shows up as the wheel changing angle when you do not want it to. A uniball at the spindle and rod ends at the frame give each pivot a defined, solid joint.

The rod ends at the frame also make the arm fully adjustable for caster and camber, so the front end can be set up for how the truck is actually driven instead of living with a fixed geometry.

Because the kit is stock length and works with the factory spindle, you get those changes without stepping into a longer-travel front end.

How It Is Built

  • Billet aluminum arms, each CNC machined at the Foutz Motorsports facility in Mesa, Arizona.
  • 1.25" FK uniball at the spindle.
  • 7/8" FK rod ends at the frame mounts, which is where caster and camber are adjusted.
  • 17-4 stainless steel spacers for every uniball and rod end, machined for durability and strength.
  • FMI billet bearing caps, one per arm.

Made in the USA.

Fitment

Fits the Gen 3 Ford F-150 Raptor R, model years 2023–2026.

Stock length, designed to work with the factory spindle. This is not a long travel arm.

Installation

A direct bolt-on part, designed around the stock spindle, with the hardware kit included. Caster and camber are set at the rod ends on the frame side of each arm, so plan to set them as part of the front-end alignment.

Finishes

Four options: raw billet aluminum, black anodized, FOX orange anodized and blue anodized.

Questions

Does this work with the factory spindle?

Yes. The arm is designed to work with the stock spindle and bolt directly on.

What joints does it use?

A 1.25" FK uniball at the spindle and 7/8" FK rod ends at the frame mounts, all with 17-4 stainless steel spacers.

Can I adjust caster and camber?

Yes. The arm is fully adjustable for caster and camber through the rod ends at the frame.

Is this a long travel arm?

No. It is stock length.

Where is it made?

CNC machined from billet aluminum at our facility in Mesa, Arizona, USA.

Color:
$ 1,599.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping

  • All in-stock products typically ship within 48 hours. 
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery. 
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com 

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Foutz Motorsports Ford F-150 Raptor Baja race truck

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust