2022-2026 Bronco Raptor Rear Mid-Travel with Shock Mount & Bump Stop Kit

• Rear shock hoop with an integrated hydraulic bump stop mount for a 2.5" diameter bump stop
• Lower shock mount with an integrated shock skid
• All hardware needed to mount the kit

Shocks and bump stops are selected separately in the options. Selecting FOX, ADS, King or Carbon includes that 2.5" hydraulic bump stop with the kit. No Bump Stop includes the bump stop mount only, with no bump stop.

On rough terrain, one shock per corner has to control the spring, absorb the hits and stop the axle at the end of travel. Push the truck harder and that single shock gets hot and runs out of capacity.

This kit builds on our hydraulic rear bump stop and secondary rear shock mount system. The second shock adds damping, the hydraulic bump stop handles the hardest hits at the end of travel, and the factory coil-over stays in place to carry the spring and keep the Live Valve system working. It works with the stock Bronco Raptor rear coil-over shock and any spring package.

Second shock

The mounts carry a 14" travel shock. Choose from the drop-down:

• FOX 3.0" x 14" smooth body. The kit is designed to work with the off-the-shelf FOX 3.0 x 14 smooth body shock with a small update to the reservoir hose and hose connections. If you order the shock from us, we change the fittings and hose before it ships.
• Custom FOX 3.0" x 14" bypass. A special three-tube bypass with a custom tube layout. It will not work with any off-the-shelf 14" travel bypass shock. Consult your Foutz Motorsports sales representative to order the correct rear shock kit.

Bump stop

The shock hoop takes a 2.5" diameter hydraulic bump stop in your choice of brand: FOX 2.5 x 2.5, ADS 2.5 x 2, King 2.5 x 2.5 or Carbon 2.5 x 2. You can also order the kit with no bump stop.

Shock availability

Supply of the custom FOX 3.0 bypass shocks is limited and can be delayed. Smooth body shocks are normally easier to get. Contact FMI for the current lead time before ordering either shock package.

The kit has been tuned and developed around the factory rear spring package with a 1" preload collar installed.

You can keep the factory rear springs and add preload collars, or upgrade to aftermarket springs depending on how much weight you plan to carry in the rear. Adding heavier rate springs may require re-valving the second shock to get the ride quality you want.

Fits the Ford Bronco Raptor, model years 2022 through 2026.

Works with the stock rear suspension links and stock panhard bar, or with FMI billet rear links and panhard bar (see below).

Fully bolt-on, with all the hardware required to install the kit. The kit does require you to trim the rear fender liners to clear the shock and mount.

Is the bump stop included?

Yes, when you select FOX, ADS, King or Carbon in the options. That 2.5" hydraulic bump stop is included with the kit. No Bump Stop includes the bump stop mount only.

Do I keep the factory rear shocks?

Yes. The factory rear shock stays, so the Live Valve electronics still work as intended. This kit adds a second shock beside it.

Can I use any 14" bypass shock?

No. The bypass option is a custom tube layout and will not work with off-the-shelf 14" bypass shocks. Talk to your Foutz Motorsports sales representative to order the correct one.

Is it bolt-on?

Yes, with all hardware included. You will need to trim the rear fender liners to clear the shock and mount.

Does it fit a 2025 or 2026 Bronco Raptor?

Yes. It fits 2022 through 2026 Bronco Raptor models.

• Foutz billet rear suspension links with Ultra-Flex joints
• Foutz billet panhard bar with Ultra-Flex joint
• Bronco Raptor preload collar kit