AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98

2024+ Ranger Raptor Rear Lower Billet Aluminum Suspension Arms with Ultra-Flex Joints

Description

Billet aluminum rear lower suspension arms for the 2024 and newer Ford Ranger Raptor, built on our patent-pending Ultra-Flex joint. Each joint pairs a 17-4 stainless steel center ball with a urethane body and is serviced through an external grease zerk.

The rear lower arms carry the axle through acceleration, braking and every hit the rear end takes. These replace the factory pair with machined billet arms and a joint built to be greased in place, stay quiet and be rebuilt instead of replaced.

What Is In The Kit

  • 2 FMI billet aluminum rear lower suspension arms
  • All hardware
  • Patent-pending Ultra-Flex joints with low-profile external grease zerks
Pair of FMI billet aluminum rear lower suspension arms with Ultra-Flex joints for the Ford Ranger Raptor

Why Upgrade The Rear Lower Arms

On a link-arm rear suspension, the lower arms take the axle's acceleration and braking loads and locate it fore and aft as the suspension cycles. Every one of those loads goes through the joints at each end, so the joint decides how the arm feels, how long it lasts and how much attention it needs.

A conventional uniball is a metal-on-metal wear item. Once it wears it squeaks and clunks, and the fix is a complete new uniball assembly. The Ultra-Flex joint is built around a urethane body that stays lubricated, can be greased on the truck, and is the only part to replace when it eventually wears.

The Ultra-Flex Joint

A 17-4 stainless steel center ball in a urethane body, greaseable through an external zerk.

  • Durable. The Ultra-Flex design is built to last significantly longer than a conventional uniball joint.
  • Quieter. The urethane helps isolate road noise and will not squeak or clunk the way a worn uniball does.
  • Resists corrosion and rust. The stainless steel components stay constantly lubricated, which makes the joint a strong choice in humid or wet weather.
  • Easy to service. The low-profile external zerk lets you add grease whenever it is needed, with the arm still installed on the truck.
  • Rebuildable. When the urethane body wears over time, you replace that body instead of a complete uniball assembly.
Second view of the FMI billet aluminum rear lower suspension arms with Ultra-Flex joints for the Ranger Raptor

Fitment

Made for the Ford Ranger Raptor, 2024 and newer, with the link-arm rear suspension.

Finishes

Choose from raw aluminum, orange anodized, black anodized or blue anodized.

Questions

What is in the box?

Two billet aluminum rear lower suspension arms with all hardware.

What is the Ultra-Flex joint made of?

A 17-4 stainless steel center ball in a urethane body, with an external grease zerk.

How do I grease the joints?

Through the low-profile external zerk, with the arm still on the truck.

What wears out, and what does it take to fix?

The urethane body is the wear part. You replace that body rather than a complete joint assembly.

Will these be noisy?

The urethane helps isolate road noise, and the joint does not develop the squeak and clunk of a worn uniball.

Does it fit my Ranger Raptor?

It is made for 2024 and newer Ford Ranger Raptor trucks with the link-arm rear suspension.

$ 1,599.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping

  • All in-stock products typically ship within 48 hours. 
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery. 
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com 

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Foutz Motorsports Ford F-150 Raptor Baja race truck

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust