AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98

SKU: FMI050604120240100

Bronco Raptor 2022 + Billet Aluminum Rear Lower Suspension Arms With Ultra-Flex Joints

Description

Billet aluminum rear lower suspension arms for the 2022–2026 Ford Bronco Raptor, built on our patent-pending Ultra-Flex joint. Each joint is serviced through an external grease zerk while the arm stays on the truck.

The rear lower arms locate the axle every time it moves. These pair a machined billet arm with a joint built to stay lubricated, stay quiet and be rebuilt rather than replaced.

What Is In The Kit

  • 2 FMI billet aluminum lower suspension arms, with spacers and hardware
  • Ultra-Flex joints with low-profile external grease zerks

FMI billet aluminum Bronco Raptor rear lower suspension arm with Ultra-Flex joint Second view of the FMI billet Bronco Raptor rear lower arm and its Ultra-Flex joint

Why Upgrade The Rear Lower Arms

The rear lower arms hold the axle in place under acceleration, braking and every bump in between. The joints at each end are where the wear happens: they pivot constantly, they take impact, and they sit low where water, mud and grit reach them.

A machined billet aluminum arm gives a solid link between chassis and axle. The Ultra-Flex joint at each end is built to deal with the wear side of the job. It stays lubricated, it isolates road noise, and when it does wear, the urethane body is the part you change.

The Ultra-Flex Joint

Our patent-pending joint, used on these arms.

  • Resistant to corrosion and rust. All the joint components stay constantly lubricated, which makes it a good fit where the weather is humid or wet.
  • Easy to service. A low-profile external zerk lets you add grease whenever it is needed, with the arm still installed on the truck.
  • Durable. The Ultra-Flex design is built to last significantly longer than a conventional uniball joint.
  • Less noise. The urethane in the joint helps isolate road noise, and it will not squeak or clunk the way a worn uniball does.
  • Rebuildable. When the joint wears, you replace the urethane body rather than a complete uniball assembly.

FMI Ultra-Flex joint suspension arm assembly

Fitment

Made for the Ford Bronco Raptor, model years 2022–2026.

Availability

These arms are built in-house in batches. Contact FMI for the current lead time.

Questions

What are the arms made from?

Machined billet aluminum.

Do these fit a 2025 or 2026 Bronco Raptor?

Yes. They are made for 2022 through 2026 Bronco Raptors.

How do I grease the joints?

Through the low-profile external zerk on each joint, with the arm still installed on the truck.

How does the Ultra-Flex joint compare to a uniball?

It is designed to last significantly longer than a conventional uniball, it stays quieter as it wears, and it is rebuilt by changing the urethane body instead of the whole joint assembly.

Is it good for wet climates?

Yes. The joint components stay constantly lubricated, which helps resist corrosion and rust in humid or wet weather.

Is hardware included?

Yes. Each arm comes with its spacers and hardware.

Color: Raw - Billet Aluminum
$ 1,599.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping

  • All in-stock products typically ship within 48 hours. 
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery. 
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com 

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Foutz Motorsports Ford F-150 Raptor Baja race truck

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust