Sway Bar Kit - Service Parts and Components

Every one of our kits is four groups of parts, and each is sold separately here:

• The bar — 33" and 39" bars.
• Sway bar arms with hardware — Gen 1 Raptor, Gen 2 and Gen 3 Raptor, Gen 3 Raptor R, Ranger Raptor and 2021+ Bronco.
• Linkage — Gen 1 Raptor, Gen 2 Raptor, Gen 3 and Gen 3.5 with the V6 EcoBoost, Raptor R Gen 3 and Gen 3.5 with the V8, Ranger Raptor fabricated arm, and Bronco fabricated arm.
• Mounts — frame mounts for Gen 1, Gen 2, Gen 3 and Gen 3.5, Raptor R, Bronco and Ranger Raptor; plus stock lower arm mounts for Gen 1, Gen 2, Gen 3 and Gen 3.5.

If you have fitted Foutz fabricated lower control arms but want to keep the factory sway bar, you need the correct link kit. We make them for the 2021+ Ram TRX, the 2024+ Ranger Raptor and the 2021+ Bronco.

Why does the linkage differ between a Raptor and a Raptor R?

Packaging. The V8 Raptor R and the V6 EcoBoost trucks route differently in that area, so Gen 3 and Gen 3.5 linkage is listed separately for each engine. Order by engine, not just by generation.

Do I need the 33" or the 39" bar?

It depends on the vehicle and which kit you are building. If you are replacing a bar, measure the one you have. If you are assembling from parts, call us and we will confirm.

Can I convert my stock-arm sway bar kit to a fabricated-arm kit?

Usually yes, by changing the lower arm mounts and linkage. The bar and frame mounts often carry over. Tell us which kit you own and we will list what you need.

Are these parts sold as complete kits anywhere?

Yes — see our Sway Bar Kits collection for complete kits by vehicle. This page is for the individual components.

Sway Bar Kits · Sway Bar Kits for Stock Arms · Service Parts · Suspension Kits