FM17000023 - FMI Gen 2 Raptor 1.5 lower uniball ball joint spacer
Description
Description
FM17000023 lower ball joint taper spacer for the FMI fabricated lower A-arm on the 2017–2020 Gen 2 Raptor, adapting a 1.5" bore uniball to the stock spindle. Accommodates a 5/8" diameter bolt.
Specifications
- Part number: FM17000023
- Type: lower uniball ball joint taper spacer
- Uniball bore: 1.5"
- Bolt: 5/8" diameter
- Vehicle: Gen 2 Raptor (2017–2020), stock spindle
Where It Is Used
For use on the FMI fabricated lower A-arm, to match the stock Gen 2 Raptor spindle and adapt it to a 1.5" bore uniball.
What It Does
A uniball has a straight bore, while the factory spindle has a tapered hole made for a tapered ball joint stud. This adapter fills the difference so the bolt passes through the uniball and clamps into the spindle taper.
Questions
What bolt does it take?
A 5/8" diameter bolt.
Which truck is it for?
The 2017–2020 Gen 2 Raptor with the FMI fabricated lower A-arm and the stock spindle.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
- All in-stock products typically ship within 48 hours.
- For items that are not currently in stock, please expect 4–6 weeks for production and delivery.
- For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com
PROP 65 WARNING
PROP 65 WARNING
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov



