AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98

2022-2026 Bronco Raptor Billet Aluminum Rear Upper Suspension Arms with Ultra-Flex Joints

Description

Billet aluminum rear upper suspension arms for the 2022–2026 Ford Bronco Raptor, built on our patent-pending Ultra-Flex joint. Each joint is serviced through a low-profile external grease zerk, with the arm still on the truck.

The rear upper arms hold the axle in place under every bump, landing and hard launch. These arms replace the factory pair with machined billet links and a joint that is built to be greased, kept quiet and rebuilt rather than thrown away.

What Is In The Kit

  • 2 FMI billet aluminum rear upper suspension arms
  • Spacers and hardware
  • Patent-pending Ultra-Flex joints with low-profile external grease zerks
Pair of FMI billet aluminum rear upper suspension arms with Ultra-Flex joints for the Ford Bronco Raptor

Why Upgrade The Rear Upper Arms

On a solid rear axle, the upper links control how the axle rotates and moves fore and aft as the suspension cycles. Every load the rear end sees passes through the joints at each end of those links, so the joint decides how the arm feels, how long it lasts and how much maintenance it needs.

A conventional uniball joint is a metal-on-metal wear item. As it wears it starts to squeak and clunk, and when it is done the whole uniball assembly gets replaced. The Ultra-Flex joint takes a different approach: a urethane body that stays lubricated, can be greased in place, and is the only part that needs replacing when it eventually wears.

The Ultra-Flex Joint

  • Easy to service. The low-profile external zerk lets you add grease whenever it is needed, without removing the arm from the truck.
  • Resists corrosion and rust. The joint stays constantly lubricated, which makes it a strong choice where the weather is humid or wet.
  • Quieter. The urethane in the joint helps isolate road noise, and it will not squeak or clunk the way a worn uniball does.
  • Durable. The Ultra-Flex design is built to last significantly longer than a conventional uniball joint.
  • Rebuildable. When the urethane body wears over time, you replace that body instead of a complete uniball assembly.
Ultra-Flex joint billet rear suspension arm assembly, Gen 3 F-150 Raptor arm shown

Fitment

Made for the Ford Bronco Raptor, model years 2022 through 2026.

Finishes

Choose from raw billet aluminum, black anodized, FOX orange anodized or blue anodized.

Questions

What is in the box?

Two billet aluminum rear upper suspension arms, with their spacers and hardware.

Do these fit a 2025 or 2026 Bronco Raptor?

Yes. They are made for 2022 through 2026 Bronco Raptor models.

How do I grease the joints?

Through the low-profile external zerk on each joint, with the arm still installed on the truck.

What wears out, and what does it take to fix?

The urethane body inside the joint is the wear part. When it wears, you replace that body rather than a complete joint assembly.

Will these be noisy?

The urethane helps isolate road noise, and the joint does not develop the squeak and clunk of a worn uniball.

Are they in stock?

Contact FMI for current availability and lead time.

Color:
$ 1,399.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping

  • All in-stock products typically ship within 48 hours. 
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery. 
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com 

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Foutz Motorsports Ford F-150 Raptor Baja race truck

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust