2017-2020 Raptor & 2015-2020 F-150 Bed Organizer Panel Kit
Description
Description
The Adapt-A-Panel bed organizer panel kit lines the bed walls of the 2017–2020 Gen 2 Ford F-150 Raptor and the 2015–2020 Ford F-150 with .135" thick 1018 steel grid panels. It attaches at existing hardware locations with the included hardware kit, and the panels cover the cleat area too.
An open bed gives loose gear nowhere to stay put. With the Adapt-A-Panel grid on the bed walls, you bolt each piece of gear to the panel with Grid Inserts, even heavy items like power tanks and high lift jacks, and change the layout whenever your load changes.
What Is In The Kit
- 2 rear large panels
- 2 front square panels
- 4 bed wall mount cleat brackets
- 2 corner support mounts for the rear tie down location
- 1 hardware kit: 24 stainless carriage bolts and nuts
Grid Inserts are not listed in the kit; they can be added any time after install.
Why Panel The Bed Walls
Gear that rides loose in a truck bed slides, bounces and gets damaged, and the bed walls are mostly unused space. Straps and bins help, but the layout is fixed once you set it.
These panels turn the bed walls into a steel mounting surface. Use Grid Inserts to mount any accessory you want to carry, including the heavy stuff, and add or move inserts any time after install so your load out can change with the trip. Full panel coverage, even over the cleat area, gives you the most mounting surface the bed walls offer.
How It Is Built
- Panels: made from .135" thick 1018 steel for strength.
- Bed wall mounts: made from the same .135" thick steel and precision bent to fit the truck.
- Hardware: 24 stainless carriage bolts and nuts, included.
- Grid design: Adapt-A-Panel Grid Inserts bolt accessories to the panels and can be added or moved any time.
Product protected by US Patent No. 11,940,092 and US Patent No. 12,276,377.
Fitment
Fits the 2017–2020 Gen 2 Ford F-150 Raptor and the 2015–2020 Ford F-150. It does not fit 2021 and newer trucks; 2021–2023 Raptors use a different kit.
Installation
The kit attaches to existing hardware locations using the included hardware kit. The bed wall mounts are cleat brackets, and two corner support mounts go at the rear tie down location.
Questions
How many panels are in the kit?
Four: 2 rear large panels and 2 front square panels, with 4 bed wall mount cleat brackets, 2 corner support mounts and the hardware kit.
Can it hold heavy gear?
Yes. The panels are .135" thick 1018 steel, and Grid Inserts can mount heavy items such as power tanks and high lift jacks.
How does it attach?
At existing hardware locations, using the included hardware kit.
Can I change my setup later?
Yes. Grid Inserts can be added any time after install, so you can change your load out depending on the situation.
Does it cover the bed cleats?
Yes. The panels cover the cleat area too, for the most mounting surface available.
Is the design patented?
Yes. The product is protected by US Patent No. 11,940,092 and US Patent No. 12,276,377.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
- All in-stock products typically ship within 48 hours.
- For items that are not currently in stock, please expect 4–6 weeks for production and delivery.
- For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com
PROP 65 WARNING
PROP 65 WARNING
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
2017-2020 Raptor & 2015-2020 F-150 Bed Organizer Panel Kit
