AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98

2021+ Bronco - Billet Panhard Bar with Ultra-Flex Joint

Description

A billet aluminum panhard bar for the 2021 and newer 6th Gen Ford Bronco, built on our patent-pending Ultra-Flex joint. It keeps the rear axle centered and tightens up the rear handling, and it installs on the factory bolts.

The stock panhard bar locates the axle through rubber bushings, and rubber gives under load. Replacing it removes those bushings, so the rear of the truck feels more planted when you drive it hard.

What Is In The Kit

  • 1 billet aluminum panhard bar
  • Ultra-Flex joints

The kit reuses the factory bolts for mounting hardware.

FMI billet aluminum panhard bar with Ultra-Flex joints for the 2021 and newer Ford Bronco

Why Replace The Panhard Bar

The panhard bar (also called a track bar) is the link that holds the rear axle centered under the truck side to side. From the factory it mounts through rubber bushings. Rubber is soft on purpose, for isolation, so under hard cornering or rough terrain it compresses and the axle shifts sideways before the bar takes up the load.

The billet bar removes those rubber bushings. With a defined Ultra-Flex pivot at each end, the axle stays centered and the rear of the Bronco feels more planted when you drive it aggressively.

The Ultra-Flex Joint

Our patent-pending joint uses a 17-4 stainless steel center ball in a serviceable urethane body, greased through an external zerk.

Ultra-Flex joint on the end of the FMI Bronco billet panhard bar
  • Durability. The Ultra-Flex joint design lasts significantly longer than a conventional uniball joint.
  • Less noise. The urethane helps isolate road noise and will not squeak or clunk the way a worn uniball does.
  • Corrosion resistant. The stainless steel components stay constantly lubricated, which makes this a strong choice for humid or wet climates.
  • Rebuildable. When the urethane body wears over time, you replace just that body instead of a complete uniball assembly.
  • Easy to service. The low-profile external zerk lets you grease the joint whenever it needs it, with the bar still installed on the truck.

Fitment

Fits the 6th Gen Ford Bronco, 2021 and newer.

May not work with aftermarket rear axle covers.

Finishes

Available in raw billet aluminum, FOX orange anodized, black anodized and blue anodized.

Questions

What does a panhard bar do?

It keeps the rear axle centered side to side under the truck. A panhard bar and a track bar are the same part.

Does it need new hardware?

No. The kit reuses the factory bolts.

How do I service the joints?

Grease them through the low-profile external zerk with the bar still on the truck. When the urethane body wears, replace the body rather than a complete joint assembly.

Will it work with an aftermarket diff cover?

It may not work with aftermarket rear axle covers.

Is it noisy?

No. The urethane in the joint helps isolate road noise, and it will not squeak or clunk the way a worn uniball does.

What is it made from?

The bar is machined from billet aluminum. The Ultra-Flex joints use a 17-4 stainless steel center ball in a urethane body.

COLOR OPTIONS:
$ 839.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping

  • All in-stock products typically ship within 48 hours. 
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery. 
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com 

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Foutz Motorsports Ford F-150 Raptor Baja race truck

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust