2021+ Bronco Lower Arm Pivot Gusset Kit - with fixed holes - Slot Delete Kit

• 4 front mount plates
• 2 rear mount front plates
• 2 rear mount rear plates

The front lower arm mounts on the frame carry the load every time a front tire hits something. Plating them with 4130 adds material where that load goes.

The factory mounts use slots so the lower arm pivot can move for alignment. That same slot is a place for the arm to shift under a hard hit. This kit replaces the slots with fixed holes, so the lower arm stays put. Alignment adjustment then has to come from the upper arm, which is why this kit is intended for use with an adjustable upper arm.

• 2021 and newer Ford Bronco
• Welds to the stock frame lower arm mounts
• Intended for use with an adjustable upper arm

Weld-in. The plates are welded to the stock frame lower arm mounts.

Can I still adjust alignment at the lower arm?

No. The fixed holes lock out alignment changes at the lower arm.

Do I need an adjustable upper arm?

This kit is intended to be used with an adjustable upper arm, since the lower arm is fixed and alignment adjustment has to come from the upper.

Is welding required?

Yes. The plates weld to the stock frame lower arm mounts.