Gen 1 Ford Raptor Parts 2010-2014 | Suspension & Upgrades

Gen 1 Ford Raptor Parts & Upgrades (2010–2014)

The Original Raptor, Built Better by the Team That Raced It First

Foutz Motorsports is the most trusted source for 2010-2014 Ford Raptor parts, suspension kits, and off-road upgrades. FMI founder Greg Foutz was the first builder to modify, race, and finish the Baja 1000 in a Ford Raptor — a story documented in the film "Raptor Born in Baja." Every Gen 1 Raptor part on this page is engineered, tested, and proven by the team with more first-generation Raptor race miles than anyone in the industry.

Whether you're chasing long-travel desert performance, preserving a daily driver, or converting your Gen 1 chassis to run Gen 3 geometry, this collection has the components to get it done right.

What's in This Collection

This category covers every major upgrade path for the 2010, 2011, 2012, 2013, and 2014 Ford F-150 SVT Raptor, including:

• Front suspension kits — Mid-travel and +3" long-travel kits with billet or fabricated upper arms, fabricated lower A-arms, billet tie rods, fabricated spindles, and FOX/ADS/King bypass shock packages
• Rear suspension upgrades — Long-travel 5-link coilover conversions, MIG-welded extended shackles, rear shackle hangers, and bump stop kits
• Gen 1 to Gen 3 Raptor conversion kits — Rear suspension conversion, 5-link arm frame mounts, spring & panhard bar mounts, stock-location upper shock mounts, and rear bump stop kits to bring modern Raptor geometry to your 2010-2014 truck
• Billet aluminum components — Upper control arm kits (stock length), heavy-duty billet top hats (stock height and 1.5" lift Phase 1), tie rod kits, half tie rods, top caps, and lower A-arm slot blocks
• Truck bed organizers & dual tire carriers — Modular Gen 1 Raptor bed cages, quick-release tire carriers, fuel jug trays, side jack mounts, and PACKOUT mounting plates
• Protection & service parts — Rear lower shock skid kits, front shock tower support rings, lower arm pivot reinforcement brackets, tie rod boots, and lower control arm bolt upgrade kits
• Shocks & accessories — FOX 3.0 Series 10" custom-valved bypass shocks (left and right), front sway bar kits, VP Racing fuel jugs, and billet stubby antennas

Why Foutz Motorsports for Gen 1 Raptor Parts?

• First to race a Raptor. FMI built and campaigned the original Raptor R race truck at the Baja 1000 in 2009 — before the truck even hit dealer lots.
• Made in the USA. Every Foutz-branded part is American-made and built to handle real off-road abuse, not just look good in the driveway.
• Engineered for upgrade paths. Our Gen 1 to Gen 3 conversion kits are the only complete solution that lets you run modern Raptor rear suspension geometry on a 2010-2014 chassis.
• Backed by 25+ years of off-road racing. Making off-road great since 1998.

Frequently Asked Questions

What years does the Gen 1 Ford Raptor cover? The first-generation Ford F-150 SVT Raptor was produced from 2010 through 2014. All parts in this collection fit those model years unless otherwise noted on the individual product page.

Can I convert my Gen 1 Raptor to Gen 3 rear suspension? Yes. Foutz Motorsports offers a complete Gen 1 to Gen 3 Raptor Rear Suspension Conversion Kit, along with à la carte components — 5-link arm frame mounts, spring and panhard bar mounts, stock-location upper shock mounts, and rear bump stop kits — so you can build the conversion in stages.

What's the difference between the mid-travel and long-travel front suspension kits? The mid-travel kit uses the stock frame mounting points and adds billet or fabricated upper arms with optional FOX 3.0" bypass shocks — a great daily-driver-friendly upgrade. The +3" long-travel kit widens the front track for maximum wheel travel and desert performance, paired with fabricated upper arms, FOX, King, or ADS 3.0" bypass shocks, and bump stop hardware.

Do you offer suspension kits with shocks included? Yes. Most front suspension kits are available with custom-valved FOX 3.0", King, or ADS 3.0" bypass shocks tuned specifically for the Gen 1 Raptor by the FMI team. Bare-frame versions are also available if you already own shocks.

How long does shipping take? In-stock items ship within 48 hours, with standard domestic shipping in 3-5 business days after dispatch. Next-day shipping is available for an additional charge. Built-to-order parts typically have a 4-6 week production lead time.

Do you ship Gen 1 Raptor parts internationally? We ship directly to the United States and Canada. For other destinations, we can recommend a freight forwarder — contact our sales team for help.

Are these parts compatible with the 2010 SuperCab Raptor and the 2011-2014 SuperCrew? Most front suspension, billet, and bed organizer components fit all Gen 1 Raptor cab configurations. Check each individual product page for cab-specific notes.

Need Help Choosing Parts?

Call the Foutz Motorsports team or message us through the site — our sales reps (Greg, Jake, Nikki, Natalie, Peter, and Bart) ride, race, and wrench on these trucks daily. We'll help you spec the right setup for your terrain, budget, and goals.