AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98
1 45

2021-2023 Raptor Front Leveling Collar kit (1.5, 2 or 3 inch lift)

Description

Designed to fit both 35" and 37" package trucks from 2021-2023 Raptor / R This is the best way to add more ride height to the front without changing all of the geometry , here's why this leveling kit is the best on the market 

You Can Customize Your Lifted Look: 
select your lift collar sizes with  1.5”, 2”, or 3"  to get the front height to be exactly what you want it to be so it sits level with the rear.  The amount of lift is measured at the wheel so pick the height you want to gain in the front and select the size from the options.

Designed by a Team of Suspension System Specialists: 
We put in the hours and hard work to construct a proper under spring spacer that mounts to the shock body under the spring perch so it can add extra preload to the stock spring.
 
We don't use a cheesy block on top of the front shock mount & here's why:
It will move the whole shock down and that lets the suspension droop farther then it was intended. This causes premature failures because it puts a bind on the ball joints and CV joints resulting in damage to occur

How do we know all this? Race Proven Engineering:
We have an incredible amount of experience & knowledge when it comes to stock suspension from our Raptor R race programs and racing our stock full Ford Super Duty race trucks over the years. Foutz Motorsports has been making suspension great since '98, that's why we want you to cash in on our experience with the best Raptor lift collar kit on the market.
 Please read the following installation requirements & recommendations for this kit

BEFORE INSTALL
This kit should be installed by a professional that has the correct tools to compress the front spring without risking injury or damage to your Raptor. Compressing a spring can be dangerous if not done correctly.

AFTER INSTALL
It is highly recommended that your truck gets an alignment after installing these lift collars to ensure you don't end up with poor tire wear in the front. 

Anodize is at a 2 week lead time min, call for in stock options / lead times may vary 
* select your ride height and collar options below*
    Color:
    $ 279.99
    ANODIZED CARE & DISCLAIMER:   read before ordering
    ⚠️ WARNING:
     Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

    SOAPS / CLEANERS THAT DAMAGE :
    High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

    ❌ WHAT TO AVOID :
    High-pH (alkaline) cleaners
    • Heavy-duty degreasers
    • Wheels / engine bay cleaners
    • Oven cleaners (e.g., Yellow Cap, Easy-Off)
    • Products containing sodium hydroxide (lye)
    • Damage the anodic coating 
    Hot Surfaces
    • Never wash in direct sunlight, as heat accelerates chemical damage
     Acidic cleaners
    • Wheel cleaners with strong acids
    • Nitric or sulfuric-based cleaners
    • Aggressive aluminum cleaners
     Aluminum brighteners or etchers

    • Products designed for raw or polished aluminum can strip the anodized coating

    ✅ HOW TO PROTECT ANODIZED ALUMINUM:

    pH-neutral soaps 
    • only use cleaners with a pH between 6–8
    Wash on cool surfaces
    • Avoid direct sunlight or hot parts
    Test small areas first
    • Always try new products on a small, hidden area
    Safe Alternatives:
    • Isopropyl alcohol (used carefully and sparingly)
    • Mild Automotive Car Wash Soap

    ⚠️ RESPONSIBILITY NOTICE:
    Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

    Delivery and Shipping
    • All in-stock products typically ship within 48 hours.
    • For items that are not currently in stock, please expect 4–6 weeks for production and delivery.
    • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com

    PROP 65 WARNING

    This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.go

    Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

    Over 20 years of racing

    We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

    Every product carries off-road DNA you can trust


    Back to top