AMERICAN MADE OFF-ROAD INNOVATIONS

MAKING OFF-ROAD GREAT SINCE '98
1 33

2025+ Ram RHO 1.5 inch front leveling kit

Description

Fix the look of your new RAM RHO -Rhino with our proven lift collars and leveling kit from Foutz Motorsports.

This is the best way to gain 1.5" of front ride height so it sits level with the rear without having the geometry change or needing a block on top of the spring

Why is it bad to add a block on top?
• When you add a block on top of the spring it moves the whole shock down and that lets the suspension droop farther then it was intended - This results in putting the Ball Joints & CV joints in a bind which will cause premature failures. 

• That is why we don't use some cheesy block on top of the shock mount that causes damage to your ball joints and CV's

How do we know this?
• We took the time to engineer and construct a proper under spring spacer that mounts to the shock body under the lower spring perch so it can add extra preload to the stock spring 

• Our team at Foutz Motorsports has an incredible amount of experience & knowledge when it comes to stock suspension from our Raptor R race programs and racing our stock full Ford Super Duty race trucks over the years.

This kit is available to be ordered as a 1.5" lift.  We suggest that you measure the front and back of your truck to determine how much lift you need. The RHO has several different spring part numbers so please measure first before you order for best results.

Comes with:

• 2 ea of the lower coil spring collars for 1.5" of lift
• 2 ea of the rotational indexing post with hardware 

 *Please Read Before Installing

This kit should be installed by a professional that has the correct tools to compress the front spring without risking injury or damage to your truck. Compressing a spring can be dangerous if not done correctly. 

Please make sure you don't try this without the correct tools for the job. Some trucks may sit different than others from factory with a variety of stock rear springs available. **You should get your truck realigned after installing the spacer to ensure you don't end up with poor tire wear in the front**

 Choose a color for your 1.5"collars below:

Finish:
$ 369.99
ANODIZED CARE & DISCLAIMER:   read before ordering
⚠️ WARNING:
 Improper cleaning can permanently damage the anodic coating on billet aluminum parts, causing fading, staining, or discoloration. 

SOAPS / CLEANERS THAT DAMAGE :
High-pH (alkaline) soaps, degreasers, and acidic wheel cleaners can fade, stain, or strip anodized aluminum, especially when they contain sodium hydroxide (lye) or other strong acids. Heavy-duty fast-acting alkaline cleaners designed for engine bays or wheels should not be used on anodized surfaces.

❌ WHAT TO AVOID :
High-pH (alkaline) cleaners
• Heavy-duty degreasers
• Wheels / engine bay cleaners
• Oven cleaners (e.g., Yellow Cap, Easy-Off)
• Products containing sodium hydroxide (lye)
• Damage the anodic coating 
Hot Surfaces
• Never wash in direct sunlight, as heat accelerates chemical damage
 Acidic cleaners
• Wheel cleaners with strong acids
• Nitric or sulfuric-based cleaners
• Aggressive aluminum cleaners
 Aluminum brighteners or etchers

• Products designed for raw or polished aluminum can strip the anodized coating

✅ HOW TO PROTECT ANODIZED ALUMINUM:

pH-neutral soaps 
• only use cleaners with a pH between 6–8
Wash on cool surfaces
• Avoid direct sunlight or hot parts
Test small areas first
• Always try new products on a small, hidden area
Safe Alternatives:
• Isopropyl alcohol (used carefully and sparingly)
• Mild Automotive Car Wash Soap

⚠️ RESPONSIBILITY NOTICE:
Damage caused by improper cleaning chemicals or detailing products is the sole responsibility of the owner. Keeping your anodized parts clean with the right products will help maintain their finish and extend their lifespan.

Delivery and Shipping
  • All in-stock products typically ship within 48 hours.
  • For items that are not currently in stock, please expect 4–6 weeks for production and delivery.
  • For stock status on products, contact our customer service team, and a representative will assist you with the most up-to-date availability and information: (480) 718-9800 | info@foutzmotorsports.com

PROP 65 WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.go

Thank you for your trust in Foutz Motorsports. We appreciate your business. Please let us know if there is anything we can do to make your experience even better. (480) 718-9800 info@foutzmotorsports.com

Over 20 years of racing

We channel that experience & knowledge to create parts that are performance driven, reliable and built tough.

Every product carries off-road DNA you can trust


Back to top