6100 / Spec TT - Trucks
Browse installation instructions for Foutz Motorsports suspension, protection, and mounting kits below. Guides are organized by product, then by vehicle.
Need to schedule an install appointment?
Please contact our shop, and a sales representative can further assist you with upgrade recommendations, installation availability, and pricing or a quote.
Frequently Asked Questions ▾View
What products require a professional install? ▾
- Any product that welds onto the frame must be installed by a qualified fabricator
- All front and rear long travel suspension kits
- All front and rear mid travel suspension kits
- Any suspension kit that involves frame modification
What products require an alignment after install? ▾
- Front lift collar / leveling kits
- Slot delete / reinforcement brackets
Which products were made to be easy to service? ▾
- All rear suspension links with an Ultra-Flex joint
- All Panhard bars with an Ultra-Flex joint
- The Ultra-Flex joint uses a low-profile external zerk fitting, so you can grease the joint whenever needed while the arm stays installed on the vehicle
What products require routine maintenance? ▾
- Standard top hats / uniballs
- Heavy duty top hats / FK uniballs
- Upper control arms
- Billet rear suspension links
- Lower control arms
How do I care for anodized aluminum parts? ▾
- Use pH-neutral soaps (pH 6–8) or a mild automotive car wash soap, and isopropyl alcohol only sparingly
- Wash on cool surfaces, out of direct sunlight, and test new products on a small hidden area first
- Avoid high-pH/alkaline cleaners, degreasers, acidic wheel cleaners, oven cleaners, and aluminum brighteners — these can fade, stain, or strip the anodized coating
- Damage from improper cleaning products is the owner's responsibility
Select a product category below, then choose your model to open the PDF.
Light Mount Kits ▾View
Front Bumper — Stock / Modular ▾
A-Pillar Brackets ▾
Single Tube Mount ▾
Light Bar Mount — Basic ▾
Race Truck Mount ▾
License Plate Mounts ▾View
Front Tow Hook License Plate Mount ▾
Fold Down GPS & Radio Mounts ▾View
Center Dash — Garmin Tread XL ▾
Center Console — 110 Watt Radio ▾
Dash Panels ▾View
Roof Panel Panels ▾View
Front Seat w/ Short Panel ▾
Rear Seat ▾
Protection Kits ▾View
Full Underbody Skid Plates ▾
Rear Shock Guards ▾
Rear Lower Shock Skids ▾
Rear Lower Link Frame Guard w/ HDPE Slide ▾
Travel Sensor Guard w/ Wire Protection Plate ▾
Fuel Tank Skid Plates ▾
Differential Skid Plate ▾
Upper Control Arms ▾View
Tie Rods — Half Length ▾View
Tie Rods — Full Length ▾View
Fabricated — Lower Control Arms ▾View
Sway Bar Kits ▾View
For Factory LCA ▾
For Foutz Fabricated LCA ▾
Suspension Reinforcement / Alignment ▾View
Pivot Reinforcement Brackets ▾
Slot Block Alignment Plates ▾
Front Bump Stop & Limit Strap Kits ▾View
Rear Bump Stop Kits ▾View
Front Lift / Leveling Kits ▾View
Rear Lift Spacer Plates ▾View
1/2" — Rear Lift ▾
3/4" — Rear Lift ▾
1" — Rear Lift ▾
Rear Spacer w/ Rear Bump Stop ▾
Rear Mid Travel Kits ▾View
Panhard Bar Kits ▾View
Billet with Ultra Flex Joint ▾
Fabricated with Johnny / Heim Joint ▾
Rear Suspension Links ▾View
Billet with Uniball (Upper & Lower) ▾
Fold Down Tailgate Kits ▾View
With Adapt-A-Panel Grid ▾
Tire Carriers / Bed Organizers ▾View