{"title":"2019 Ford Ranger Parts and Accessories","description":"Check out all of the new upgrades and accessories we offer for your 2019 and up Ford Ranger truck.  From Ranger skid plates to Suspension kits we have you covered.  Come to Foutz Motorsports for more info on what is available for your Ford Ranger.","products":[{"product_id":"2019-ford-range-skid-plate","title":"2019 - UP Ford Ranger Skid Plate","description":"\u003cp\u003eKeep your new Rangers important components protected from rocks and scrapes while driving off and on road. \u003cspan\u003eMade from 3\/16 thick aluminum and is \u003c\/span\u003e100% bolt on designed around the truck.  Full bolt on with no drilling.  Designed with our race proven concepts found on our popular Ford Raptor skid plate kits.  Extends from the stock front skid plate all the way back behind the transfer case providing full coverage under the truck.  The kit comes with a 2 piece aluminum plate set and 3\/16\" thick mild steel mounting bracket kit.\u003c\/p\u003e\n\u003cp\u003eAdd on steel mounting plates are powder coated with a black hammer texture for good looks and durability.\u003c\/p\u003e\n\u003cp\u003eComes with all hardware required to install.  Can be done with little mechanical experience and basic hand tools.\u003c\/p\u003e\n\u003cp\u003eWORKS WITH:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eall 2019 - UP Ford Ranger truck configurations.\u003c\/li\u003e\n\u003cli\u003eworks on 2 wheel drive and 4 wheel drive trucks\u003c\/li\u003e\n\u003cli\u003eFord Ranger Raptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***May Not work with aftermarket lift kits****\u003c\/strong\u003e\u003c\/p\u003e","brand":"Foutz Motorsports LLC","offers":[{"title":"Default Title","offer_id":19667266666555,"sku":"FMI0201100100NA00","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/products\/2019_Ranger_Skid_plate.jpg?v=1554741743"},{"product_id":"2019-ford-ranger-differential-skid-plate","title":"2019 - 2023 Ford Ranger Rear Differential Skid Plate","description":"\u003cp\u003eProtect the rear axle from rock damage with this race inspired differential skid plate.  Built to fit the all new Ford Ranger truck this skid plate fits perfect and installs in minutes.  Give the ultimate protection to the rear diff cover seal on the bottom that has been a historic problem for off-road trucks.  The skid covers and supports the lower back plate to ensure rocks don't catch and pull the gasket seal loose.  Cheap insurance for the avid off-roader.\u003c\/p\u003e\n\u003cp\u003eDesigned to work with stock rear differential cover or the Ford Performance cast cover both in one kit.\u003c\/p\u003e\n\u003cp\u003eWORKS WITH:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll 2019 - UP Ranger truck configurations\u003c\/li\u003e\n\u003cli\u003eStock Rear smooth sheet metal covers\u003c\/li\u003e\n\u003cli\u003eFord Performance Cast rear covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e ***Will not work with OTHER aftermarket diff covers***  inquire if you have something else and would like us to look into covering it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e*Recommended to be installed by qualified technician \u003c\/b\u003e\u003c\/p\u003e","brand":"Foutz Motorsports LLC","offers":[{"title":"Default Title","offer_id":19667499155515,"sku":"FMI0201100120NA01","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/products\/diff_skid.jpg?v=1561421393"},{"product_id":"off-road-seat-back-panel-kit-with-recovery-gear","title":"Off-Road Seat Back Panel Kit with Recovery Gear","description":"\u003cp\u003eThis kit starts with our second generation Adapt-a-panel grid panel then we add a group of off-road specific gear to make the full kit.  This was designed with the off-road enthusiast in mind and set up for quick install and removal when you need it.  \u003c\/p\u003e\n\u003cp\u003eThis kit includes the following :\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/adapt-a-panel-16-x-24-seat-back-panel-second-generation-grid-pattern\"\u003estandard second generation Adapt-a-panel 16 x 24 seat back panel\u003c\/a\u003e\u003cbr\u003e1 ea basic single strap kit - single top strap and base strap\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/off-road-medical-kit\" title=\"off-road medical kit\"\u003eOff-Road Medical Kit\u003c\/a\u003e \u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/30-ft-x-4-in-heavy-duty-tow-strap\"\u003e30' long Heavy Duty tow strap\u003c\/a\u003e\u003cbr\u003e1 ea quick release strap 24\" long for tow strap\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/lexivon-v14-camping-hatchet\"\u003e14\" Camping Hatchet\u003c\/a\u003e\u003cbr\u003e2 ea 8\" long Velcro strap for hatchet handle\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/sog-sogfari-13-machete-black-blade-w-saw-back-rubber-handle-nylon-sheath\"\u003eSOG 13\" machete \u003c\/a\u003e\u003cbr\u003e2 ea 12\" long Velcro straps for machete\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/large-molle-bag\"\u003elarge Molle strap bag\u003c\/a\u003e \u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/small-molle-pouch-multi-purpose\"\u003esmall Molle strap bag\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e*** Assembled by YOU for your preferences*** \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cb data-olk-copy-source=\"MailCompose\"\u003eProduct Protected by: \u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eUS Patent No. 11,940,092\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eUS Patent No. 12,276,377\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adapt-A-Panel","offers":[{"title":"Default Title","offer_id":36923788918942,"sku":"","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/products\/gear-organizer-panel-off-road-kit-type-1_2-1.jpg?v=1605498316"},{"product_id":"off-road-seat-back-panel-kit-with-shovel-hammer-fire-extinguisher","title":"Off-Road Seat Back Panel Kit with Shovel - Hammer - Fire Extinguisher","description":"\u003cp\u003eThis kit starts with our second generation Adapt-a-panel grid panel then we add a group of off-road specific gear to make the full kit.  This was designed with the off-road enthusiast in mind and set up for quick install and removal when you need it.  \u003c\/p\u003e\n\u003cp\u003eThis kit includes the following: \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/adapt-a-panel-16-x-24-seat-back-panel-second-generation-grid-pattern\"\u003estandard second generation Adapt-a-panel 16 x 24 seat back panel\u003c\/a\u003e\u003cbr\u003e1 ea basic single strap kit - single top strap and base strap\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adapt-a-panel.myshopify.com\/admin\/products\/6074062930113\"\u003eExtreme duty takedown shovel\u003c\/a\u003e\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/fire-extinguisher-5b-c-dry-chemical-2-lb-11-tall\"\u003e2 lb Fire Extinguisher\u003c\/a\u003e\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adapt-a-panel.myshopify.com\/admin\/products\/6074051887297\"\u003eMedium Molle bag\u003c\/a\u003e\u003cbr\u003e3 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/mini-quick-fist-clamp-for-mounting-tools-equipment-5-8-1-3-8-diameter\"\u003emini quick fist mount\u003c\/a\u003e - shovel x2 - flashlight x1\u003cbr\u003e2 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/long-arm-quick-fist-clamp-pair\"\u003ehanging quick fist mount\u003c\/a\u003e\u003cbr\u003e1 ea\u003ca href=\"https:\/\/adaptapanel.com\/products\/real-steel-rubber-grip-sledge-hammer-3-lb\"\u003e 3 LB hammer\u003c\/a\u003e\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/collections\/grid-accessories\/products\/adapt-a-panel-hammer-head-plate\"\u003eHammer head mount tray\u003c\/a\u003e\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/emt-tactical-first-responder-tool-belt-holster\"\u003esmall emt kit\u003cbr\u003e\u003c\/a\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/adapt-a-panel-7-bolt-threaded-steel-grid-insert-mount-kit-1\"\u003e7 bolt steel grid insert\u003c\/a\u003e\u003cbr\u003e1 ea \u003ca href=\"https:\/\/adaptapanel.com\/products\/quick-fist-medium-mount-with-lower-bolt-plate-assy\"\u003eMedium quick fist with base mount\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e*** Flashlight not included\u003c\/p\u003e\n\u003cp\u003eAssembled by YOU for your preferences *\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cb data-olk-copy-source=\"MailCompose\"\u003eProduct Protected by: \u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eUS Patent No. 11,940,092\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eUS Patent No. 12,276,377\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adapt-A-Panel","offers":[{"title":"Default Title","offer_id":36923790426270,"sku":"","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/products\/adaptapanel-tactical-panel-organizer-for-off-road-truck.jpg?v=1605498342"},{"product_id":"bullet-proof-diesel-third-brake-light-antenna-mount-with-rigid-leds-2019-2021-ford-ranger","title":"2019 - 2023 Ford Ranger Bullet Proof Diesel Third Brake Light Antenna Mount","description":"Best way to get an antenna mounted to your Ranger for Radio Communications. Rigid lights are there to show traffic behind you where you are in the dust! The Bullet Proof Diesel is the best mount on the market to do the job!","brand":"Bullet Proof Diesel","offers":[{"title":"Rigid Lights","offer_id":39988097056926,"sku":"90201170","price":544.95,"currency_code":"USD","in_stock":true},{"title":"Baja Designs Lights","offer_id":39988113637534,"sku":"90201171","price":501.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/products\/90201170_SD_ANTENNA_DUAL_MOUNT_AMBER_LIGHT-G_112c7c7f-212e-470e-819c-712231316200.jpg?v=1622245702"},{"product_id":"ranger-raptor-full-billet-tie-rod-kit","title":"2024 Ranger Raptor Billet Tie Rod Kit","description":"\u003cp\u003e\u003cstrong\u003eThese Ranger Raptor full length Billet Tie Rods are CNC machined in house and feature high quality components so you're Ranger Raptor can get the affordable steering upgrade it deserves, here are the k\u003c\/strong\u003e\u003cstrong\u003eey features: \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"220\" width=\"391\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/ranger-raptor-billet-tie-rod-steering-suspension-kit.gif?v=1724714343\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdapts the outer section to use a high quality 7\/8 rod end at the wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTie rods and FK rod ends for the joints are made out of\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e 6061-T6 aluminum hex stock\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e7\/8 FK rod ends at the spindle that feature custom high misalignment spacers made out of 17-4 stainless steel to ensure proper cycle and solid feel - then attached with grade 8 bolts and lock nuts to keep things tight and strong\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAt the steering rack we use 17-4 stainless steel clevis adapter and 3\/4 FK rod ends with 17-4 stainless steel spacers and then grade 8 bolts \u0026amp; lock nuts again. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWe use a Urethane boot to ensure the rack is sealed up to keep water and dirt out of the steering box which is very important\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg height=\"285\" width=\"431\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/2024-ranger-raptor-billet-tie-rod-kit-suspension_5.png?v=1724981642\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 ea Billet Tie rod tubes with 7\/8 rod ends at the wheel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 ea 3\/4 rod ends at the steering rack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 ea Steering rack clevis adapters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 ea Tie Rod boots to keep it sealed up\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 kit of hardware which includes 17-4 stainless steel spacers, grade 8 bolts and nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e******  Kits are in production but please allow 3-5 weeks for delivery of these kits ******\u003c\/strong\u003e\u003c\/p\u003e","brand":"Foutz Motorsports LLC","offers":[{"title":"Raw - Billet Aluminum","offer_id":43795628654804,"sku":"FMI0501238500NA00","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodize","offer_id":43795628687572,"sku":"FMI0501238500NA91","price":899.99,"currency_code":"USD","in_stock":true},{"title":"FOX Orange Anodized","offer_id":43795628720340,"sku":"FMI0501238500NA92","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Blue Anodized","offer_id":43795628753108,"sku":"FMI0501238500NA93","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/2024-ranger-raptor-billet-tie-rod-kit-suspension_8.png?v=1724981646"},{"product_id":"packout-truck-bed-side-wall-storage-mounting-plate-any-vehicle","title":"PACKOUT Storage Universal Mounting Plate","description":"\u003cp\u003eThese mounting plates are the ultimate storage system for Milwaukee Packout boxes and bags.\u003c\/p\u003e\n\u003cp\u003eEasy Bolt on install to nearly any surface (Drilling Required)\u003c\/p\u003e\n\u003cp\u003eR \u0026amp; D Tested in extreme off-road conditions\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e6 ea 1\/4-20 x 1\" long bolts,  nylock nuts, and washers included with each mount panel\u003c\/p\u003e\n\u003cp\u003eWill work with \u003ca href=\"https:\/\/www.foutzmotorsports.com\/search?options%5Bprefix%5D=last\u0026amp;q=bed+organizer+panel\u0026amp;filter.p.product_type=\"\u003eAdapt-A-Panel Bed Organizer Panel Kits \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e*Milwaukee Packout Boxes NOT Included\u003c\/p\u003e","brand":"Foutz Motorsports LLC","offers":[{"title":"Single Plate with Outside Mounts","offer_id":44167289602260,"sku":"AP9099981002NA01","price":119.99,"currency_code":"USD","in_stock":true},{"title":"Single Plate with Hidden Mounts","offer_id":44167286980820,"sku":"AP9099981000NA01","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Double Plate with Outside Mounts","offer_id":44167290028244,"sku":"AP9099981003NA01","price":159.99,"currency_code":"USD","in_stock":true},{"title":"Double Plate with Hidden Mounts","offer_id":44167289077972,"sku":"AP9099981001NA01","price":165.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/milwaukee-packout-truck-bed-side-wall-tool-box-storage-mounting-plate_2.png?v=1701908591"},{"product_id":"shock-tower","title":"2015+ F150 to Gen 2 Raptor - Coil Bucket Conversion Kit","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis is weld-in coil bucket conversion kit is what you need to update your 2015 \u0026amp; up F150 to fit Gen 2 Raptor shocks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Will work with any aftermarket kit that fits into the stock bucket.  Made from 3\/16 thick steel and MIG welded.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 0, 0);\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"198\" width=\"329\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/raptor-shock-tower-spring-bucket-kit_5.png?v=1723155478\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","brand":"Foutz Motorsports LLC","offers":[{"title":"Default Title","offer_id":45302513107156,"sku":"FMI0515039650NA00","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/raptor-shock-tower-spring-bucket-kit_6.png?v=1723155416"},{"product_id":"2021-2024-raptor-billet-aluminum-top-hat-for-stock-shock-copy","title":"2017-2020 Raptor Billet Top Hat - Stock Height","description":"\u003cp\u003e\u003cspan\u003eOur new Foutz Motorsports billet top hat provides the ultimate strength for your stock shock upper mount.  Made from 6061-T6 aluminum and CNC machined for a perfect fit.  We utilize high quality FK uniballs in our top hat kits to ensure the ultimate strength.  The uniball spacers are made from 17-4 stainless steel providing the ultimate quality for long life.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe kit features 10mm studs to match up with the Gen 2 shock towers.  This version is designed to retain stock height and provide no lift when installed.  We also make a lift version that adds preload to the spring to gain some ride height without having to change the front spring.  This also eliminates the need to add a lower spring collar to get the preload you desire.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWhy do you need this billet top hat?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• The main mount that supports the shaft on the stock top hats has a rubber bushing that's notoriously known for being the main weak point that causes factory top hat to fail - especially if they have after-market springs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• When the top hat fails it lets the shock drop all the way out of the spring bucket and causes damage to other suspension parts can causing expensive damage that can be avoided.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-ogsc=\"black\" style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cb\u003ePREVENT THIS FAILURE FROM HAPPENING\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\" style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eand replace your factory top hat with \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eour \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\" style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eNEW BILLET ALUMINUM TOP HATS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\" style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/ford-raptor-billet-top-hat-2010-2024.png?v=1724722216\" width=\"442\" height=\"337\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-ogsc=\"black\"\u003e\n\u003cspan\u003e• \u003c\/span\u003eIf you plan on doing some serious off-roading with progressive after-market coils or want to add more preload to your factory shocks - \u003cstrong\u003ewe highly recommend pairing these Billet Top Hats with our \u003c\/strong\u003e\u003ca href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-2-raptor-front-limit-strap-kit-for-stock-lower-arm-2017-2020-f150-raptor?_pos=4\u0026amp;_sid=d6a03d383\u0026amp;_ss=r\" title=\"Ford Raptor (2017-2020) Front Limit Strap Kit for Stock Lower A-Arm\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eFront Limit Strap Kit\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-3-raptor-front-limit-strap-kit-for-stock-suspension-parts?_pos=1\u0026amp;_sid=d6a03d383\u0026amp;_ss=r\" title=\"Ford Raptor (2021-2024) Front Limit Strap Kit for Stock Lower A-Arm\" target=\"_blank\"\u003e \u003c\/a\u003ethat features a mounting bracket with a built-in bump pad\u003cspan\u003e so a front bump stop can be easily added at any time. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\"\u003e\u003ca href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-2-raptor-front-limit-strap-kit-for-stock-lower-arm-2017-2020-f150-raptor?_pos=4\u0026amp;_sid=d6a03d383\u0026amp;_ss=r\" title=\"Ford Raptor (2017-2020) Front Limit Strap Kit for Stock Lower A-Arm\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e(details)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(6) M10 - 1.5 x 40 \u003c\/p\u003e\n\u003cp\u003e(4) Pivot Spacers\u003c\/p\u003e\n\u003cdiv style=\"max-width:100%;\"\u003e\n  \u003cstyle\u003e\n    \/* Scoped CSS for this dropdown only *\/\n    .fmi-dropdown summary {\n      font-weight: 600;\n      font-size: 16px;\n      cursor: pointer;\n      background: #000;\n      color: #FFD700;\n      padding: 10px;\n      border-radius: 4px;\n      list-style: none; \/* remove default arrow *\/\n      position: relative;\n    }\n\n    \/* Custom arrow *\/\n    .fmi-dropdown summary::after {\n      content: \"▼\";\n      position: absolute;\n      right: 15px;\n      transition: transform 0.3s ease;\n    }\n\n    \/* Rotate arrow when open *\/\n    .fmi-dropdown[open] summary::after {\n      transform: rotate(180deg);\n    }\n\n    \/* Content inside dropdown *\/\n    .fmi-dropdown-content {\n      margin-top: 10px;\n      font-size: 14px;\n      line-height: 1.5;\n    }\n\n    .fmi-dropdown-content img {\n      max-width: 100%;\n      height: auto;\n      margin-bottom: 10px;\n      border-radius: 4px;\n    }\n\n    \/* Style for link *\/\n    .fmi-dropdown-content a {\n      color: #0000FF; \/* Blue *\/\n      font-weight: bold;\n      text-decoration: underline;\n    }\n  \u003c\/style\u003e\n\n  \u003cdetails class=\"fmi-dropdown\"\u003e\n    \u003csummary\u003eIMPORTANT INFO - PLEASE READ BEFORE ORDERING\u003c\/summary\u003e\n\n    \u003cdiv class=\"fmi-dropdown-content\"\u003e\n      \u003c!-- Optional image --\u003e\n      \u003c!-- \u003cimg src=\"YOUR-IMAGE-URL-HERE\" alt=\"Standard Billet Top Hat\"\u003e --\u003e\n\n      \u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Billet Aluminum top hats utilize a serviceable and replaceable uniball that will have to be serviced from time to time. The uniball is pressed into the billet aluminum housing that we manufacture and the uniball will wear out over time but can be easily replaced with a low cost replacement.\u003c\/p\u003e\n\n      \u003cp\u003eThe amount of time the uniball will last is variable and will differ from customer to customer.\u003c\/p\u003e\n\n      \u003cp\u003eThe uniballs are not something we manufacture at Foutz Motorsports. We use industry leading FK rod ends uniballs in all of our suspension components to ensure the best possible quality for your kit. The uniball is designed to be a wear item and to be replaced when they start to wear out.\u003c\/p\u003e\n\n      \u003cp\u003eFor the standard billet top hat we use the FK uniball part number \u003cstrong\u003eFKS12T\u003c\/strong\u003e and you can find that replacement part at this link: \u003ca href=\"https:\/\/www.foutzmotorsports.com\/collections\/serviceable-parts\/products\/fks12t-fk-uniball-0-875-bore-1-061-od\" target=\"_blank\"\u003eFK FKS12T Replacement Uniball\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Foutz Motorsports LLC","offers":[{"title":"Raw - Billet Aluminum","offer_id":45572818632916,"sku":"FMI050103970040100","price":499.99,"currency_code":"USD","in_stock":true},{"title":"FOX Orange Anodized","offer_id":45572818665684,"sku":"FMI050103970040192","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodize","offer_id":45572818698452,"sku":"FMI050103970040191","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/raptor-f150-2017-2020-billlet-top-hat-kit_1.png?v=1724723684"},{"product_id":"2017-2020-raptor-heavy-duty-billet-top-hat-for-stock-shock-stock-height-no-lift","title":"2017-2020 Raptor Heavy Duty Billet Top Hat - Stock Height","description":"\u003cdiv style=\"text-align: left;\" data-ogsc=\"black\"\u003e\n\u003cp style=\"text-align: center;\" dir=\"ltr\"\u003e\u003cstrong\u003eUpgraded your stock front shock top hats that are prone to failure with the latest advancement from the team at Foutz Motorsports.  Our new Heavy Duty Billet Top Hat kit provides the ultimate in strength and durability for your Raptor by using bigger and stronger WSSX14T - wide series 7\/8 FK uniballs made with 17-4 stainless steel races and 400 series stainless steel ball.  These are the strongest Uniball available and provide more surface area on the ball than any other option.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" dir=\"ltr\"\u003e\u003cstrong\u003eOur new Heavy Duty Billet Top Hat not only uses the new stronger Uniball configuration but also employs a new threaded top retainer to help keep the Uniball in place and support the ring clip from coming loose under abuse.  The top cap threads into the main body and is retained with 4 stainless steel Allan screws to ensure it cant back out.  The new top cap design also adds extra support the the side of the Uniball where the center ball puts pressure on the race area to help keep the Uniball last longer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" dir=\"ltr\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/2017-18-19-20-ford-raptor-billet-replacement-top-hat-heavy-duty_15.png?v=1753922615\" alt=\"\" width=\"322\" height=\"402\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCNC-machined from 6061-T6 aluminum for a precise fit, this top hat is built for performance. We use only high-quality WSSX14T - 7\/8\" FK uniballs, paired with custom Uniball spacers made from 17-4 stainless steel, ensuring long-lasting strength and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cspan\u003eThis kit includes 10mm studs designed to match Gen 2 shock towers and maintains the factory ride height—no lift added. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy You Need This Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eThe OEM top hat relies on a rubber bushing, which is prone to failure—especially when aftermarket springs are installed.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eFailure of the factory bushing can allow the shock to drop out of the spring bucket, potentially damaging other suspension components.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003ePrevents costly suspension damage by replacing the weak link in your stock setup with a robust billet solution.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's different from a standard Billet Top Hat Kits?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eThe original billet top hat uses a 3\/4 standard FK Uniball and the new Heavy Duty Billet Top hat uses a WSSX14T 7\/8\" Uniball that provides nearly double the overall strength of the standard 3\/4\" standard Uniball\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eThe addition of the threaded top retainer ensures the Uniball ring clip can't come out and let the bearing shift or fail.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eThe new threaded top retainer was also designed so that it holds pressure on the side of the bearing race at the thinnest area where it has the most pressure from the center ball to support the side of the race and making the bearing last much longer.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003e• Precision Machined:\u003c\/strong\u003e\u003cspan\u003e CNC-machined from 6061-T6 aluminum for a perfect fit and maximum durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003e• Upgraded Bearing Design:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eFeatures a larger FK uniball with a new thread-in top retainer for better bearing support and retention.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003e• Premium Materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cspan\u003eFK WSSX14T uniballs for industry-leading strength and performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cspan\u003e17-4 stainless steel uniball spacers for exceptional wear resistance and longevity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003e• Gen 2 Compatible:\u003c\/strong\u003e\u003cspan\u003e Uses 10mm studs to fit Gen 2 Raptor shock towers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" dir=\"ltr\"\u003e\u003cstrong\u003e• Stock Height Retention:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eDesigned to maintain factory ride height—no lift added.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cspan\u003e\u003cb id=\"docs-internal-guid-62c55a10-7fff-20b2-1728-2b70d9c62d6a\"\u003e\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\"\u003e\n\u003cspan\u003e• \u003c\/span\u003eIf you plan on doing some serious off-roading with progressive after-market coils or want to add more preload to your factory shocks - \u003cstrong\u003ewe highly recommend pairing these Billet Top Hats with our\u003ca href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-2-raptor-front-limit-strap-kit-for-stock-lower-arm-2017-2020-f150-raptor\"\u003e \u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-2-raptor-front-limit-strap-kit-for-stock-lower-arm-2017-2020-f150-raptor\"\u003e\u003cstrong\u003eFront Limit Strap Kit\u003c\/strong\u003e \u003c\/a\u003ethat features a mounting bracket with a built-in bump pad\u003cspan\u003e so a front bump stop can be easily added at any time. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\"\u003e\u003ca rel=\"noopener\" title=\"Ford Raptor (2017-2020) Front Limit Strap Kit for Stock Lower A-Arm\" href=\"https:\/\/www.foutzmotorsports.com\/products\/gen-2-raptor-front-limit-strap-kit-for-stock-lower-arm-2017-2020-f150-raptor?_pos=4\u0026amp;_sid=d6a03d383\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cstrong\u003e(details)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv data-ogsc=\"black\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(6) M10 - 1.5 x 40 \u003c\/p\u003e\n\u003cp\u003e(4) Pivot Spacers\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"max-width:100%;\"\u003e\n  \u003cstyle\u003e\n    \/* Scoped CSS for this dropdown only *\/\n    .fmi-dropdown summary {\n      font-weight: 600;\n      font-size: 16px;\n      cursor: pointer;\n      background: #000;\n      color: #FFD700;\n      padding: 10px;\n      border-radius: 4px;\n      list-style: none; \/* remove default arrow *\/\n      position: relative;\n    }\n\n    \/* Custom arrow *\/\n    .fmi-dropdown summary::after {\n      content: \"▼\";\n      position: absolute;\n      right: 15px;\n      transition: transform 0.3s ease;\n    }\n\n    \/* Rotate arrow when open *\/\n    .fmi-dropdown[open] summary::after {\n      transform: rotate(180deg);\n    }\n\n    \/* Content inside dropdown *\/\n    .fmi-dropdown-content {\n      margin-top: 10px;\n      font-size: 14px;\n      line-height: 1.5;\n    }\n\n    .fmi-dropdown-content img {\n      max-width: 100%;\n      height: auto;\n      margin-bottom: 10px;\n      border-radius: 4px;\n    }\n\n    \/* Style for link *\/\n    .fmi-dropdown-content a {\n      color: #0000FF; \/* Blue *\/\n      font-weight: bold;\n      text-decoration: underline;\n    }\n  \u003c\/style\u003e\n\n  \u003cdetails class=\"fmi-dropdown\"\u003e\n    \u003csummary\u003eIMPORTANT INFO - PLEASE READ BEFORE ORDERING\u003c\/summary\u003e\n\n    \u003cdiv class=\"fmi-dropdown-content\"\u003e\n      \u003c!-- Optional image --\u003e\n      \u003c!-- \u003cimg src=\"YOUR-IMAGE-URL-HERE\" alt=\"HD Top Hat Kit\"\u003e --\u003e\n\n      \u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Billet Aluminum top hats utilize a serviceable and replaceable uniball that will have to be serviced from time to time. The uniball is pressed into the billet aluminum housing that we manufacture and the uniball will wear out over time but can be easily replaced with a low cost replacement.\u003c\/p\u003e\n\n      \u003cp\u003eThe amount of time the uniball will last is variable and will differ from customer to customer.\u003c\/p\u003e\n\n      \u003cp\u003eThe uniballs are not something we manufacture at Foutz Motorsports. We use industry leading FK rod ends uniballs in all of our suspension components to ensure the best possible quality for your kit.\u003c\/p\u003e\n\n      \u003cp\u003eThe uniball is designed to be a wear item and to be replaced when they start to wear out.\u003c\/p\u003e\n\n      \u003cp\u003eFor the Heavy Duty billet top hat we use the FK uniball part number \u003cstrong\u003eWSSX14T\u003c\/strong\u003e and you can find that replacement part at this link: \u003ca href=\"https:\/\/www.foutzmotorsports.com\/collections\/serviceable-parts\/products\/wssx14t-uniball-0-875-bore-wssx14t-fk-bearings-plain-spherical-bearings\" target=\"_blank\"\u003eFK WSSX14T Replacement Uniball\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Foutz Motorsports LLC","offers":[{"title":"Raw - Billet Aluminum","offer_id":46600476000468,"sku":"FMI050103970340100","price":629.99,"currency_code":"USD","in_stock":true},{"title":"FOX Orange Anodized","offer_id":46600476033236,"sku":"FMI050103970340192","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodize","offer_id":46600476066004,"sku":"FMI050103970340191","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/files\/2017-18-19-20-ford-raptor-billet-replacement-top-hat-heavy-duty_3.png?v=1753922263"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1054\/1650\/collections\/2018SEMA-AddictiveDesertDesign-FordRanger8.jpg?v=1623551619","url":"https:\/\/www.foutzmotorsports.com\/collections\/2019-ford-ranger\/2013.oembed","provider":"Foutz Motorsports LLC","version":"1.0","type":"link"}